Watch this: Did the iPhone 7 survive our water test?
04:36
Plop.
That's the sound of your phone impacting a pot of tomato sauce. Or a swimming pool. Or -- God forbid -- a toilet bowl.
Normally, you're screwed. Unless you're very, very lucky (and have some silica gel packets handy), your phone's delicate circuits are toast.
But if you've got a water-resistant phone like the new iPhone 7, Galaxy S7 or Sony Xperia XZ, things could be way different. Just rinse off that tomato sauce -- with more water -- and you're back in business.
Enlarge Image
The new iPhone 7 is water-resistant.
As a Samsung Galaxy S7 owner, I can tell you: it's awesome. I don't take my phone swimming or anything like that -- I simply use it without fear.
Enlarge Image
Washing dishes? Totally cool to leave your phone on the kitchen counter.
It's a great feature. But what makes a phone water-resistant? And just how "waterproof" are these handsets, anyway? Whether you're weighing pros and cons of the new iPhone or just want to know how your phone could survive a dip in the pool, we've got the answers below.
iFixit teardown engineer Scott Havard asks us to picture an egg: a perfect, unbroken shell. There's no place for water to get in.
Now replace that egg with a plastic Easter egg, and you begin to see the difficulty.
Enlarge Image
That's a lot of holes to protect.
"If you have an Easter egg that can break into two parts, all of a sudden the game changes," says Havard. Water goes to the place of least resistance -- the gap between the shells -- and sometimes, it can get through. "With enough pressure, you can push water molecules into the device," says Havard.
But your phone doesn't just have one gap. It has many. Every single port, button, speaker grille and microphone hole could be the weakest link that lets water into your handset. That's not to mention the giant gap between the rim of your phone and its glass screen.
Havard says modern, brittle glass screens pose a particularly hard problem for water-resistance, since manufacturers can't permanently attach them to the frame.
So manufacturers use a surprisingly simple technique: glue. Lots of it.
They're called gaskets, seals, tapes or adhesives, but it all means the same thing: manufacturers use sticky, rubbery glue-like substances to create an airtight seal.
Enlarge Image
That black strip? It's the proprietary adhesive Samsung uses to keep water from penetrating the Galaxy S7's screen gap.
iFixit
Just look at any teardown of a water-resistant handset: you'll see a thick, sticky substance that cements the screen to the chassis. Manufacturers also use dabs of glue at the back of ports (typically where USB, Lightning and 3.5mm headphone jacks connect to the motherboard) and sometimes on top of exposed circuits near the edges of the frame.
Enlarge Image
This neon orange gasket keeps water from penetrating through the iPhone 7 Plus mute switch.
iFixit
Glue doesn't work for everything, though: you wouldn't want visible goop oozing out where buttons, ports and removable components stick out of the phone.
That's where rubber gaskets come in: little O-rings that press up against the inside of the device, expanding as they're firmly fastened (squished) against the inside surface.
You'll find the rubber rings around a phone's headphone jack and charging port, and there's typically a tiny rubber gasket around the SIM card tray. Apple even uses the rings around some cable connectors as an extra insurance policy.
For buttons, manufacturers may use a different technique: a little boot of silicone rubber that completely separates the physical part you push from the electrical contacts inside. It's a little bit like covering your shoes with a plastic bag before stepping out onto the wet sidewalk. That goes for the little button you push with a paper clip to pop out your SIM card tray, too.
Enlarge Image
Four waterproofing techniques in one Galaxy S7 photo: glue, speaker mesh, rubber gaskets and a pressure vent (the little gray square) for the microphone.
iFixit
But it's important that a few parts of the phone aren't completely sealed.
Speakers and microphones need air to enter and leave your phone, because creating vibrations in the air is how they produce sound. Plus, if a phone is completely airtight, the pressure inside the phone might not be equal to the outside, creating an opportunity for that pressure to breach the phone's seals and let water in.
Enlarge Image
Even with a little bit of pressure, water doesn't pass through the fine mesh of this Galaxy Note 7 speaker vent.
JerryRigEverything
How do they keep water out? Science! Many manufacturers of water-resistant phones place an incredibly fine mesh in front of their speakers and microphones, prompting the water to follow its natural tendency -- through cohesion and surface tension -- to "stick to itself" rather than passing through.
And in some cases, like the bottom-left speaker grille on the iPhone 7 or the Galaxy S7's microphones, manufacturers use a fancier pressure vent as well.
Instead of just a mesh, they add a water-resistant, breathable fabric membrane (ePTFE) to let air through and equalize the pressure. (Gore, the maker of ePTFE material Gore-Tex -- yes, the same fabric you'll find in your ski jacket -- tells CNET it's sold over a billion portable electronics vents to date.)
Some manufacturers, like Samsung, even protect their charging ports from shorting out by automatically switching them off, and use corrosion-resistant metals (like nickel) to keep rust from wearing phones down.
That's why modern water-resistant devices don't need finicky port covers to keep the water out.
Problem is, none of these techniques are enough to keep water out indefinitely. There's no such thing as a waterproof phone.
Enlarge Image
Don't do this at home. Apple recommends you never intentionally submerge an iPhone in water, even if it's water-resistant.
"With enough pressure, water will travel through; it's just a matter of how much is needed," says iFixit's Havard.
Enlarge Image
That's why Apple, Samsung, and Sony are so insistent on the phrase "water-resistant" instead of "waterproof."
But there's also the little matter of water with added chemicals. For instance: salt.
Sony used to proudly advertise that you could take pictures underwater with its Xperia phones. But in 2015, Sony got in trouble with Australian regulators and citizens who claimed the phones stopped working (and even rusted) after a swim in the pool. What Sony may not have counted on: Australia's home swimming pools typically use salt water, which can corrode and breach the seals of a water-resistant phone.
Practically overnight, Sony changed its tune -- it started explicitly telling people not to use their phones underwater, and to keep them far away from salt.
Above: Sony used to advertise its phones as waterproof. Not anymore.
And while Sony's stance has slightly softened since ("If you want to use your device to get underwater close-ups of a spectacular dive or your child's first swimming lesson, go ahead," read the company's current guidelines), the company says that advice only applies to a chlorinated freshwater (not salt) swimming pool, with an IPX8-rated phone (more on that in a sec), and that you need to rinse off the chlorine with fresh water afterwards.
Meanwhile, Apple has a whole list of things you shouldn't do with a water-resistant phone.
Enlarge Image
Look close, and you'll see a rubber gasket on the edge of the SIM card tray in recent Samsung Galaxy phones.
When companies say their phones are water-resistant, here's what they really mean: the phone was able to withstand a certain amount of water for a certain period of time.
How much? Depends on the IP ratings.
I won't go into too much detail about the IP rating system here, because we've got a whole CNET article about that. Suffice it to say water-resistant phones are tested to see if they can:
And that's about it.
(If you're sitting on the bottom of a swimming pool for half an hour, you've got bigger issues.)
But that (and protection against dust) is all an IP rating guarantees, and it only proves a manufacturer managed to pass those tests in their lab. It says nothing about being able to actually use a phone underwater, or drop a phone into water instead of gently submerging its frame, or with other types of liquid.
Above: How Samsung tests its Galaxy S7 Edge for water resistance.
The IP ratings also don't guarantee that your phone will still be able to survive water after a bit of wear and tear, or even simply sitting out on a shelf.
And they doesn't guarantee that your phone will immediately work after a dip. (For instance, Apple recommends you let a phone dry for at least five hours before attempting to charge it.)
And you should probably be warned that none of these manufacturers need to help you if their water-resistance fails.
Even though these companies claim their phones are water-resistant, none of their warranties protect against water damage. In fact, Apple, Sony and Samsung all explicitly say that water damage isn't covered. Plus, each company places tiny stickers inside their phones that bleed when exposed to water, so they can tell how the damage occurred.
Could you successfully argue that faulty waterproofing is the reason the circuits got wet? Perhaps; no company wants angry customers. When Samsung's Galaxy S7 Active drowned, the company agreed to replace any water-damaged S7 Active within a year of purchase.
More generally, a Samsung representative told us they'd perform investigations into water-damaged phones if a customer asked, and a Sony rep told us the company would replace a phone that had been water damaged in the first year of purchase "as long as the phone is not used in environments where the advertised IP rating limitations are exceeded."
But you'd have to trust these companies to honor those unwritten promises, when they could simply use the water damage as proof you broke your own phone. And remember, Apple doesn't promise anything at all.
Put another way: Maybe I should stop throwing my Galaxy S7 into hot tubs.
VIEW ALL WATER RESISTANT MONITORS
Are you looking for a waterproof outdoor stainless steel monitor or weatherproof touch screen for outdoor signage? Do you need it to provide you crystal clear images in sunlight? Must it also be able to contend with the threats of Mother Nature? Try an outdoor display from TRU-Vu Monitors. Every TRU-Vu outdoor monitor and weatherproof touch screen is perfect for use outdoors in any weather. Similarly, they are also ideal for use in factories or processing plants, car-washes, or where wash-down hoses would destroy standard LCD monitors. They are also ideal as video displays for car wash facilities. Outdoor display screens are becoming exceedingly popular for wide applications from way-finding to marketing or just pure entertainment.
Interestingly, there are many different factors to consider if you want to install an outdoor monitor in an area exposed to the elements. Not only do outdoor monitors / outdoor signage need to be weather-proof, but useful in their new location. Our SRMW- and SXOBH- Series Sunlight Readable monitors are specifically designed for use as outdoor monitors. Consequently, we provide you with the protection you need. Whether you are up against rain, snow or sleet, we perform. Additionally, our high brightness waterproof screens are 4 to 8 times brighter than a standard LCD video monitor. Ours range from 1,000 nits to 2,500 nits brightness. We ensure sharp, clear images in daylight . But, more importantly, even in direct sunlight. Watch our Video on Monitor View-ability in Direct, Bright Sunlight
When you search for a waterproof high brightness LCD display or weatherproof touch screen, it is essential to make sure they are designed for the job. Check out our SRMW-24Z-SS 24 inch weatherproof screens. For 2500 nits brightness, our SXOBH-55-4 and SXOBH-65-3 waterproof Sunlight Readable monitors will be the best outdoor monitor solution. Rated IP 68, they provide the highest level of protection of any outdoor monitor on the market today. All TRU-Vu monitors are TAA Compliant.
Ingress Protection Code (IP) is an internationally accepted standard. It classifies and rates the degree of protection provided by enclosures. Protections include against intrusion and dust. Also included are accidental contact, and water. For example, this rating provides a standardized metric to compare different products’ performance with each other. The first number refers to protection against solids. IP second number refers to protection against liquids. Additionally, there may be an X in the rating. It means testing was not performed for that specific protection. For a more detailed description on IP Ratings follow the link. View our IP & NEMA Ratings literature for more information, or watch our video: Demonstration.
We offer weatherproof touch screens and waterproof stainless steel monitors with a variety of resolutions and aspect ratios for your outdoor signage needs. For instance, 4:3 aspect ratio, 5:4 aspect ratio and 16:9 aspect ratio waterproof monitors are available. Outdoor displays are used in amusement parks, auto racing, car wash facilities, and mass transit. They have also been deployed for advertising, digital signage, kiosks, sports stadiums and military systems. Outdoor monitors and weatherproof touch screens are a fast-growing segment in today’s outdoor display market. We offer only TAA-Compliant monitors.
TRU-Vu also offers a range of outdoor signage, and weatherproof touch screen and weatherproof stainless steel monitor options for industrial, commercial or residential use. The SXN Series models are available with 55″ and 65″ screen sizes. With 4K resolution and 500 nits of brightness, video images look great in bright conditions. Additionally, our SXOBH Series outdoor TV’s represent the top-of-the line performance in outdoor TV technology. With a fully-sealed IP 68 enclosure, 2,500 nits of brightness, optical bonding, and an operating temperature of -31° to +140°F. Furthermore, they are completely maintenance-free, with no fans, vents or filters to worry about. The front screen is protected by impact-resistant safety glass with an Anti-Reflective coating. It is rated IK 10, and can withstand a 60 mph fastball!! The SXOBH is available with 55″ and 65″ screens. Outdoor video images have never looked so good!
Waterproof Monitors